BT Internet Radio User Manual download pdf (Page 27)

Internet Radio – New Style – Edition 5 – 21.09.06 – 7690

1. Keep pressing Back to get to the radio’s top-level menu and then

turn the tuning dial to select

Media Player

and press Select.

2. Turn the tuning dial to display

UPNP Servers

and press Select.

The radio will scan for all available UPnP servers.

3. After a successful scan, select your UPnP server by turn the

tuning dial to highlight the one you want (if there is more

than one), then press Select.

4. At this stage, your radio should be listed in ‘Windows Media

Connect’ and can be viewed from the ‘Devices’ window; your

radio will be displayed with its MAC address. To verify that the

MAC address listed is your radio, select

Configure

on your

radio’s menu and then turn the tuning dial until

Network

Config

is displayed and press Select. You can now control

the access for this device on your PC using Windows media

connect by looking in the ‘Devices’ section and clicking on

‘Deny’ or ‘Allow’.

5. Turn the tuning dial until

View Config

is displayed and

press

Select.

6. Turn the tuning dial until

MAC Address

is displayed to view

your radio’s MAC address.

7. The radio will now list the media categories available from the

UPnP server, e.g. Music, Playlists etc. Turn the tuning dial to

select which category you wish to browse (for example

Music

) and press Select.

It may take a few seconds for the

radio to complete the scan. Before

the scan has completed, the radio will

display

[Empty]

. The radio will

continue to display

[Empty]

if no

UPnP servers are found.

Using the Media Player

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 39 40

Comments to this Manuals

No comments

BT Internet Radio User Manual Page 27

Comments to this Manuals