BT Internet Radio User Manual download pdf (Page 7)

Internet Radio – New Style – Edition 5 – 21.09.06 – 7690

3. Connect to the wireless network

With the name for the access point you want to connect to

displayed, press

Select.

If your network is not configured to need an encryption code,

the display should show

Connecting to network

, then

Network OK

If the screen displays either

Enter WEP key

Enter WPA

key

, then the network is using one of the encryption systems:

WEP or WPA and you will need to enter the correct code to

enable the radio to communicate with your network.

After about 3 seconds, the display goes into the code entry

mode. To enter the code, use the tuning dial to select each

character of the code in turn, pressing

Select after each

character.

When you have entered the final character, use the tuning

dial to select

END

and press Select.

The radio should now be able to connect to the network.

Connecting a headset (optional)

Connect the headset plug into the socket marked on the

side of the radio.

Your BT Internet Radio is ready for use.

The WEP or WPA code would have

been set up by the person who set up

and configured your wireless network.

Getting started

WEP and WPA codes are sensitive to

upper and lower case characters so

you must ent

er them exactly

Make sure the character you want is

shown in the centre of the display

before you press

Select.

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

BT Internet Radio User Manual Page 7