BT ON-AIR 2100 SMS User's Guide download pdf (Page 32)

On-Air 2100 SMS user guide ~ Edition 3 ~ 29th July ’02 ~ 4641

Once slotted into the rear

of the base, slide upwards

to lock into position.

Push the base-mount

forward onto the rear

of the base.

122 mm

WALL

WALL PLUG

SCREW

122mm

If wall mounting your BT On-Air 2100 SMS, use

this guide for position.

• Make sure that you are not drilling into any

hidden wiring and check that the power cable

will reach from the mains socket to the

charger. Switch the power adaptor off at the

mains and remove the adaptor plug from its

socket.

• Drill two holes 25mm deep using a 3mm drill,

122mm apart to take the wall plugs.

• Put wall plugs into the drill holes and then

insert both screws. Leave 2-3mm between

the head of the screw and the wall. You are

now able to mount the base to the wall.

• Fit the base onto the two screws. If necessary,

tighten or loosen the screws for the best fit.

• Put the handset back in the base and switch

the power back on at the wall socket.

Wall mounting

1 2 ... 27 28 29 30 31 32 33 34 35

No comments

BT ON-AIR 2100 SMS User's Guide Page 32