Bt 500 User Manual download pdf (Page 55)

Verve 500 – New Style – Edition 3 – 07.09.06 – 7706

If you experience any problems, please call the Helpline on 0870 242 6652 or email [email protected]

Switch your answering machine on remotely

If your answering machine is switched off, but remote control

is set to on, you can ring your BT Verve 500 from another

phone and switch the answering machine on remotely.

1. Dial your telephone number and let it ring. After 20 rings you

will hear the voice prompt “Please enter your security code”.

2. Press

# then enter your 3-digit security code. You will hear a

long beep. Press

8 to switch the answering machine on. If you

don’t hear a long beep after entering the code, enter it again.

Check for messages remotely

If you left your answering machine on and remote control is

also set to on, you can ring your BT Verve 500 and check for

messages remotely.

1. Dial your phone number. When you hear your outgoing

message press # then enter your 3-digit security code.

You will hear a long beep. Press

2 to play all messages or

press

# then 2 to play all new messages.

Operating your answering machine remotely

When you have accessed your answering machine messages,

you can use any of the button presses shown on the following

page to control answering machine operations:

To be able to switch on your BT Verve

500 remotely from another phone

you must have set ‘Remote Control’

to ON.

If ‘Remote Control’ is switched ‘off’

and you ring in, after 20 rings your

answering machine will take the call

and begin to play the ‘Answer only’

outgoing message.

If you enter the incorrect PIN code

you will be allowed two fur

ther

attempts, if it is still incorrect your

BT Verve 500 will hang up.

Answering machine

Time saver

When you ring in to access your

messages remotely, if you have set

the ‘Answer Delay’ setting (page 43-

44) to ‘Automatic’ (time saver) and

you have new messages it will answer

2 rings, if you do not have any new

messages, it will answer after 6 rings.

This means you can hang up after 5

rings knowing you have no new

messages, saving you time and the

cos

t of the call.

You cannot use this f

eature if you

have BT Answer 1571 or Call Minder

active as the call will be intercepted

before the 2 rings.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 85 86

Comments to this Manuals

No comments

Bt 500 User Manual Page 55

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Bt 500

Verwandte Produkte und Handbücher für Die Eingabegeräte Hp CQ45-323TX