BT Business Hub 3 User Manual download pdf (Page 13)

Note: To protect your network, it is recommended that you

enable the SBS firewall. To allow all inbound traffic to flow

through the firewall to the SBS 2003:

1. From a computer connected to the BT Business Hub,

open a browser and connect to the BT Business Hub user

interface by browsing to the following address: http://home

2. Click the ‘Firewall’ tab, as shown in the image

3. Click the ‘Firewall Settings’ link

4. Select the computer to which you would like to have

specific ports through the BT Business Hub firewall.

In the following example, the computer selected is SBS.

Please see on the image opposite

5. Select ‘Allow All’ applications. This allows all inbound data

destined for the SBS 2003 to pass through the firewall.

Please see on the image opposite

6. Click ‘DONE’

7. Close the browser

8. Perform an IP address release and IP address renew. This

will move the computer from the 192.168.1.0 IP range to

the designated Static IP address

9. Return to the SBS setup screen

Allow all inbound traffic to flow to the SBS 2003

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

No comments

BT Business Hub 3 User Manual Page 13