BT Elements User's Guide download pdf (Page 4)

Elements Additional Handset – New Style – Edition 2 – 31.08.06 – 7780

3. At the charger: Plug the charger power cord into the charger

and the mains power wall socket. Place the handset on the

base to charge for at least 24 hours. The red Charging light

comes on. While the handset is charging, the symbol

scrolls in the display, when the handset is fully charged the

display shows the symbol.

Registering your handset to your BT Elements base

If you are registering the handset to another DECT GAP

compatible base station that is not a BT Elements, please refer

to the user guide for that base for registration instructions.

IMPORTANT

DECT GAP Profile only guarantees that basic calling functions will work

correctly between different makes/types of handset and base. There’s a

possibility that certain services such as Caller Display will not work correctly.

The extended range feature only applies when registered to a BT

Elements base.

IMPORTANT

Bef

ore regis

tration, make sure the handset batteries are fully charged and that

you are close to the main base unit.

At the BT Elements base:

1. Press and hold until you hear a beep, then release it.

The base will now remain in registration mode for 90 seconds,

during which time you will need to complete the following

procedure.

t the BT Elements additional handset:

2. Press to open the main menu.

3. Press or until

is displayed, then

press .

4. Press or to highlight

Reg Base

and press .

5. Enter a base number (from 1 to 4) and press .

Getting started4

If you experience any problems, please call the Helpline on 0870 605 8047

1 2 3 4 5 6 7 8 9 ... 13 14

No comments

BT Elements User's Guide Page 4