BT Versatility User Manual download pdf (Page 48)

BT Versatility

Installation and Maintenance Manual

Programming

Essential programming is carried out either from a Featurephone connected to extension 20 or via the BT

Versatility wizard, the programming PC application.

Ensure that the following programming is done.

Equipped exchange lines

The system assumes that all line cards have lines connected to them. If lines are not connected, it is vital

to unequip these lines in system programming, as follows:

• From the programming position, press the phone programming key

select ‘System programming’.

• Enter the PIN and select ‘Lines’.

• Select ‘Equipped lines’.

• Equipped lines are denoted by ♦. Unequipped lines are denoted by ◊.

• Press

HANDS FREE to finish programming.

Incoming ringing

The phones to be rung for incoming calls are programmed as follows

• Select 'Lines'

• Select 'Incoming Ringing'

• Select the Line or Access

• Select 'Day mode', 'Night Mode' or 'Day and Night mode'

• Select whether the line is to ring an extension or Group. If the Line is to be presented to the Auto

Attendant or Courtesy service it is selected here.

Note that the first 8 extensions are in group 1 as default. To change the extensions in a group, select

'Lines' and then 'Group Programming'.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 58 59

No comments

BT Versatility User Manual Page 48