Bt STUDIO 4500 User Manual download pdf (Page 5)

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or email bt.helpdesk@vtecheurope.com

Warning

Do not place your BT Studio 4500 in

the bathroom or other humid areas.

Handset range

The BT Studio 4500 has a range of

300 metres outdoors when there is a

clear line of sight between the base

and the handset. Any obstruction

between the base and handset will

reduce the range signicantly.

With the base indoors and handset

either indoors or outdoors, the range

will normally be up to 50 metres.

Thick stone walls can severely affect

the range.

Signal strength

The

symbol on your handset

screen indicates when you are in

range. When you are out of range,

the

symbol ashes, and the

screen displays

Searching.

You should move closer to the base

if this happens to ensure the full

functionality of your phone.

Important

Do not connect the telephone line

until at least one of the handsets is

fully charged.

The base station must be plugged

into the mains power at all times.

Which socket?

Power socket

: Telephone line socket

Talk/Standby time

Under ideal conditions, fully charged

handset batteries should give about

10 hours talk time or 100 hours

standby time on a single charge.

Getting started

Location

You need to place your BT Studio 4500 base within

2 metres of a mains power and telephone socket so that the

cables will reach.

Make sure it is at least 1 metre away from other electrical

appliances to avoid interference.

Your BT Studio 4500 works by sending radio signals between the

handset and base. The strength of the signal depends on where

you site the base. Putting it as high as possible ensures the

best signal.

Setting up

1. Plug the mains power cable with the blue ring on the connector

(item code 048611) into the power socket marked

on the

back of the base and secure the cable behind the retaining clip.

Plug the other end into the mains socket and switch on.

2. Remove the protective lm from the

handset screen and activate the

batteries by pulling the plastic tab

away from the back of the handset.

Mains power cable Cable retaining clip

Rechargeable batteries

already fitted

Remove this tab

and charge batteries

for 24 hours before use.

Telephone line cord

(pre-installed)

1 2 3 4 5 6 7 8 9 10 ... 49 50

Comments to this Manuals

No comments

Bt STUDIO 4500 User Manual Page 5

Comments to this Manuals

Related products and manuals for Handset Cordless Phone Bt STUDIO 4500